Yamaha SWR2100P-10G SWR2100P-10G/SWR2100P-5G Owners Manual - Page 7

English NOTICE NOTICE To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices below. Handling and maintenance • Do not touch any port with your fingers or anything metallic. Failure to observe this precaution could result in damage to the product. • Do not use the device in the vicinity of a TV, radio, AV equipment, mobile phone, or other electric devices. Otherwise, the device, TV, or radio may generate noise. • Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components. • Do not place vinyl, plastic or rubber objects on the device, since this might discolor the panel. • When cleaning the device, use a dry and soft cloth. Do not use paint thinners, solvents, cleaning fluids, or chemicalimpregnated wiping cloths. • Condensation can occur in the device due to rapid, drastic changes in ambient temperature-when the device is moved from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can cause damage. If there is reason to believe that condensation might have occurred, leave the device for several hours without turning on the power until the condensation has completely dried out. • Be sure to earth (ground) any static electricity from your body or clothing before touching the product. Failure to observe this precaution could result in damage to the product. • Do not install the product in a location where magnetic fields are strong. Otherwise, it might cause the product to malfunction. • Do not connect any noise generating devices on the same power line as the product. Failure to observe this precaution could result in a malfunction or damage to the product. • Do not locate any connected LAN cables close to the power cord. Otherwise, high voltage might be induced, resulting in malfunction. • A 1000BASE-T connection will require an Enhanced Category 5 (CAT5e) or better LAN cable. • The rubber feet included in this package can be attached to the device to prevent slippage when it is to be used on a slippery surface. About functions/data bundled with the device • This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. (CISPR22) Regarding disposal • This product contains recyclable components. When disposing of this product, please contact the appropriate local authorities. SWR2100P-10G/SWR2100P-5G Owner's Manual 7