Yamaha Tio1608-D2 Tio1608-D2 Owners Manual - Page 18
Warnings, Information Message
View all Yamaha Tio1608-D2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
How to read the indicators Warnings The indicators will light and/or flash as shown until the cause is resolved. If the green [SYNC] is unlit, the unit's clock is unconfirmed. [SYNC] Description Clock settings are incorrect. Off Flashing Unit not connected to Dante network. Possible Solution Check the clock leader and sampling frequency settings of the Tio1608-D2 and Dante Controller. Make sure the cables are not damaged and that they are connected properly. Off Flashes 2 times Cable wiring is wrong; cannot find other Dante devices. Check the wiring of the Ethernet cables. Off Flashes 3 times If the green indicator is flashing, the unit is the clock leader. If the green indicator is lit, the unit is the clock follower and the clock is synchronized. [SYNC] Description Possible Solution Device that is not Gigabit Ethernet compatible is connected. To use Dante to send and receive digital audio, make sure your devices are Gigabit Ethernet compatible. Lit or flashing Lit When using a redundancy network, Check the connections of the network [SECONDARY] is sending/receiving audio. connected to the [PRIMARY]. Lit or flashing Flashing When using a redundancy network, error was detected on the [SECONDARY]. Check the connections of the network connected to the [SECONDARY]. Lit or flashing Flashes 2 times Information Message The indicators will remain lit and/or flashing cyclically to report the status. If the orange [SYNC] is unlit, the unit is operating normally. If the green [SYNC] is unlit, the unit's clock is unconfirmed. [SYNC] Description Synchronizing on a Dante network. Off Lit Waiting to receive setting data. The unit is functioning correctly as the word clock leader. Possible Solution Please wait until started has completed or until the unit has finished synchronization. It may take up to 45 seconds for completion. If START UP MODE is set to REFRESH on the Tio1608-D2 unit, the input/output will be muted until the unit receives setting data after it starts up. The unit is operating as the word clock leader. Flashing Off Lit Off Tio1608-D2 Owner's Manual The unit is functioning correctly as the word The unit is operating as the clock follower clock follower. and the clock is synchronized. - 18 -