Yamaha XM4180 Owner's Manual - Page 9
Speaker connections XM4180/XM4080, Connection configurations for BRIDGED mode
View all Yamaha XM4180 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
● Speaker connections (XM4180/XM4080) Speakers can be connected to the amplifier in two ways, as shown below. Note that speaker impedance will vary according to the connection method and the number of speakers. Please be sure that your speaker's impedance is not less than the relevant minimum value indicated below. Connection configurations for STEREO and PARALLEL modes Connection configurations for BRIDGED mode or -+ +- -+ Minimum speaker impedance: 4 Ω Minimum speaker impedance: 4 Ω Minimum speaker impedance: 8 Ω * The illustration shows model XM4180. When connecting high-impedance speakers in parallel (XM4180 only) XM4180 enables you to connect in parallel fashion multiple high-impedance speakers that support 70V line output. The number of speakers that can be connected varies depending on the rated input of the speakers. The XM4180 can be connected to speakers with a total rated input of up to 300 W. For example, if you connect ten speakers with a rated input of 5 W (50 W), ten speakers with a rated input of 10 W (100 W) and ten speakers with a rated input of 15 W (150 W), the amplifier can be used with a total rated speaker input of 300 W as shown below: Be sure to use speakers that support the XM4180's line-out voltage of 70 V. 1 10 1 10 1 5W 5W 10W 10W 15W 10 15W 5 W x 10 speakers (50W) 10 W x 10 speakers (100 W) 15 W x 10 speakers (150 W) Total rated input of speakers:300 W (maximum) * The illustration shows model XM4180. XM4180/XM4080/XH200 Owner's Manual 9 7