Yamaha YSP-3300 Owners Manual - Page 12

Installation Enjoying surround effects regardless of conditions (My Surround) The My Surround function creates rich surround sound effects in rooms with less than optimal surround sound conditions (☞p. 11). See "Changing the audio output method for surround playback" (☞p. 36, 37) for more information. If the TV remote control does not work properly after the center unit is installed (TV Remote Repeater function) The TV may not respond to commands from its remote control if the center unit obstructs the remote control sensor on the TV. Should this occur, press the REMOTE REPEATER key on this unit's remote control more than 3 seconds to set the TV TV remote control Remote Repeater function to enable. The REPEATER indicator on the front panel display will light. When the TV remote control is aimed at the center unit's remote control sensor, the TV Remote Repeater on the back of this unit TV Remote Repeater transmits signals from the TV remote control to the TV. Signals from the TV remote control can be transmitted to the TV while this unit is in standby mode. Note This function can be used while the TV remote control is using infrared signals. TV remote control sensor If the center unit cannot be installed on a TV stand (increasing the height of the center unit) In most cases, the center unit can be placed on a TV stand. The supplied spacers can be attached to increase the height of the unit if necessary. Attach both the left and right spacers to the unit. Align the protrusions on the back of the spacer with the mounting holes on the bottom of the center unit and press the spacer firmly into place. Removing the spacers Pull the spacers straight up. Spacer Pull the spacer straight up. Protrusions Mounting holes Bottom of the center unit 12 En