Yamaha YSP-3300 Owners Manual - Page 61
Image Location, Channel Out
View all Yamaha YSP-3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
PREPARATION PLAYBACK Example Front left channel With positive focal lengths Center channel With negative focal lengths Setup menu 2 Adjust the image location for the front right channel (RIGHT). The higher the percentage, the louder the output from the center channel. Control range: 0%* to 95% Right-channel sound is unnatural With the front right channel adjusted IMAGE LOCATION If sound from the left and right channels is unnatural, first adjust the volume of each channel (☞p. 33, 62). If this does not resolve the problem, adjust left- and right-channel image location. Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel. Use this feature to redirect audio signals if the sound coming from the front left and right channels seems unnatural. You can adjust this parameter only when "5Beam/Plus2", "5Beam" or "3Beam" is selected in "Changing the audio output method for surround playback" (☞p. 36). Sub menu: ADJUSTMENT Select "ON" to configure the sound direction. Selectable item: OFF*, ON CHANNEL OUT Sub menu: 5.1ch, 7.1ch, AUTO* Specify the sound beam output method (5.1ch, 7.1ch, AUTO). When "AUTO" is selected, sound beams are output from the appropriate number of channels based on input signal as follows. - 2- or 5.1-channel input: 5.1-channel output - 6.1- or 7.1-channel input: 7.1-channel output The available sound beam output methods vary depending upon the current "CHANNEL OUT" setting (☞p. 36). 1 Adjust the image location for the front left channel (LEFT). The higher the percentage, the louder the output from the center channel. Control range: 0%* to 95% Left-channel sound is unnatural With the front left channel adjusted SETTINGS TROUBLESHOOTING APPENDIX 61 En