Yamaha YSP-3300 Owners Manual - Page 24
Using AUTO SETUP IntelliBeam - test
View all Yamaha YSP-3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Initial settings ENTER SYSTEM MEMORY RETURN Using AUTO SETUP (IntelliBeam) Notes • It is normal for loud test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the AUTO SETUP procedure is in progress. • If there are curtains in your listening room, we recommend following the procedure below. 1 Open the curtains to improve sound reflection. 2 Run "BEAM OPTIMIZE ONLY" (☞p. 26). 3 Close the curtains. 4 Run "SOUND OPTIMIZE ONLY" (☞p. 26). • Make sure that your listening room is as quiet as possible. For accurate measurement, turn off air conditioner or other devices that make noises. 1 Turn the unit and your TV on. 2 Switch TV input to display video input from this unit (☞p. 21). 3 Connect the IntelliBeam microphone to the INTELLIBEAM MIC jack on the rear of the unit. IntelliBeam microphone 24 En