Zanussi ZBB28650SA Product Manaul - Page 12
Ha, Hb, Hc and Hd.
View all Zanussi ZBB28650SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
C E D E E 8 mm K Ha B E 7 Attach the covers (C, 8 If the appliance must D) to the lugs and the connect laterally to the hinge holes. kitchen furniture door: Install the vent grille (B). 1. Attach the hinge covers (E) to the hinge. 2. Slacken the screws in fixing brackets (E). Move the brackets (E). 3. Retighten the screws. Ha Hb Hc Hd ~50 mm 90o 21 mm 90o ~50 mm 21 mm 9 Disconnect the parts 10 Install the part (Ha) on (Ha), (Hb), (Hc) and (Hd). the inner side of the kitch- en furniture. 8 mm Ha Hb Hc Ha 11 Push the part (Hc) on the part (Ha). 12 Open the appliance door and the kitchen furniture door at an angle of 90°. Insert the small square (Hb) into guide (Ha). Put together the appliance door and the furniture door and mark the holes. Hb 13 Remove the brackets and mark a distance of 8 mm from the outer edge of the door where the nail must be fitted (K). 14 Place the small square on the guide again and fix it with the screws supplied. Align the kitchen furniture door and the appliance door by adjusting the part Hb. Hb Hd 15 Press the part (Hd) on the part (Hb). Do a final check to make sure that: • All screws are tightened. • The magnetic sealing strip is attached tightly to the cabinet. Important! If the ambient temperature is low (for example, in the Winter), the size of the gasket decreases. The size of the gasket increases when the ambient temperature increases. 12 www.zanussi.com