Zanussi ZCG63050WA User Manual - Page 23
Energy Efficiency
View all Zanussi ZCG63050WA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
A E B D C C WARNING! The gas bayonet connector must be in the marked area. Dimension mm A 250 B 680 C 50 D 250 E 580 PRESSURE TEST The Rapid injector is used as a pressure test point. 1. Connect the pressure gauge to the Rapid injector. 2. Examine the supply pressure by turning the Rapid burner and one other burner fully on, and lighting them. The pressure must be 20 mbar for Natural Gas. 3. Turn the taps off and disconnect the pressure gauge. 4. Make sure that all burners work correctly. CHECKING THE HOB BURNERS 1. Lift the lid. ENERGY EFFICIENCY 2. Put on the burner crowns and caps. Make sure that they are correctly seated. 3. Put on the pan supports. 4. Light one of the hob burners. To light the hob burner refer to the "Ignition of the hob burners". Check if the flame is regular. Check each of the burners. 5. Turn the knob for the hob to the off position. CHECKING THE OVEN BURNERS 1. Put in the deep pan and the trivet. 2. Light the oven burner. To light the oven burner refer to the "Ignition of the oven burners". Check if the flame is regular. 3. Turn the knob to the off position. ELECTRICAL INSTALLATION WARNING! The manufacturer is not responsible if you do not follow the safety precautions from Safety chapters. This appliance is supplied with a main plug and a main cable. The spark generator is active all the time if the phases are not connected correctly. WARNING! The power cable must not touch the part of the appliance shaded in the illustration. PRODUCT INFORMATION FOR HOB ACCORDING TO EU 66/2014 Model identification ZCG63050WA 23