Zanussi ZCI66050WA User Manual - Page 22
Caution, Removing And Cleaning The Door, Glasses - Top Oven, Glasses - Main Oven, Replacing The Lamp
View all Zanussi ZCI66050WA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
1 2 REMOVING AND CLEANING THE DOOR GLASSES - MAIN OVEN The door glass in your product can be different in type and shape from the example you see in the image. The number of glasses can also be different. 1. Push the door trim at one side to remove it. Install the shelf supports in the opposite sequence. CAUTION! Make sure that the longer fixing wire is in the front. The ends of the two wires must point to the rear. Incorrect installation can cause damage to the enamel. REMOVING AND CLEANING THE DOOR GLASSES - TOP OVEN The door glass in your product can be different in type and shape from the examples you see in the image. The number of glasses can also be different. 1. Open the door. 2. Hold the door trim on the top edge of the door at the two sides and push inwards to release the clip seal. 1 2 1 3. Pull the door trim to the front to remove it. 4. Remove the glass panels. To install the panels, do the same steps in reverse. A 2 1 2. Pull up the trim. 3. Remove the glass panels. To replace the glass panels, do the same steps in reverse. Before you lower the trim, attach the A trim part to the door. Refer to the image. REPLACING THE LAMP WARNING! Risk of electric shock. The lamp can be hot. 1. Turn off the oven. Wait until the oven is cooled down. 2. Disconnect the oven from the mains. 3. Put a cloth on the bottom of the cavity. The back lamp The lamp glass cover is at the back of the cavity. 1. Turn the lamp glass cover counterclockwise to remove it. 2. Clean the glass cover. 3. Replace the oven lamp with a suitable 300 °C heat-resistant oven lamp. 22