Zanussi ZCI66050WA User Manual - Page 24
Installation
![]() |
View all Zanussi ZCI66050WA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Problem Possible cause Remedy comes on the hob display. comes on the hob display. comes on the hob display. The oven does not heat up. The oven does not heat up. The lamp does not operate. Steam and condensation settle on the food and in the cavity of the oven. There is no cookware on the zone. The cookware is incorrect. The diameter of the bottom of the cookware is too small for the zone. The oven is deactivated. The necessary settings are not set. The lamp is defective. You left the dish in the oven for too long. Put cookware on the zone. Use the correct cookware. Refer to "Hob - Hints and tips" chapter. Use cookware with correct dimensions. Refer to "Hob - Hints and tips" chapter. Activate the oven. Make sure that the settings are correct. Replace the lamp. Do not leave the dishes in the oven for longer than 15 - 20 minutes after the cooking process ends. SERVICE DATA If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the oven cavity. Do not remove the rating plate from the oven cavity. We recommend that you write the data here: Model (MOD.) Product number (PNC) Serial number (S.N.) INSTALLATION ... WARNING! Refer to Safety chapters. TECHNICAL DATA Dimensions Height 894 - 912 mm Width Depth Dimensions 600 mm 609 mm 24
![](/manual_guide/products/zanussi-zci66050ba-user-manual-475721b/24.png)