Zanussi ZDF2020 Product Manaul - Page 13

Technical data, Environment concerns

Page 13 highlights

The cleaning results are not satisfactory The dishes are not clean • The selected washing programme is not applicable for the type of load and soil. • The baskets are loaded incorrectly so that water cannot reach all surfaces. • Spray arms do not turn freely because of incorrect arrangement of the load. • The filters are dirty or not correctly installed. • The quantity of detergent is too little or missing. Limescales particles on the dishes • The salt container is empty. • The water softener is adjusted on a wrong level. • The salt container cap is not closed correctly. The dishes are wet and dull • No rinse aid has been used. • The rinse aid dispenser is empty. There are streaks, milky spots or • Decrease the rinse aid dosage. a bluish coating on glasses and dishes Dry water drop signs on glasses • Increase rinse aid dosage. and dishes • The detergent can be the cause. Technical data Dimensions Electrical connection - Voltage Overall power - Fuse Water supply pressure Capacity Width cm 60 Height cm 85 Depth cm 61 Information on the electrical connection is given on the rating plate on the inner edge of the dishwasher door. Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Place settings 12 Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PEPS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

The cleaning results are not satisfactory
The dishes are not clean
The selected washing programme is not applicable for the type of load and
soil.
The baskets are loaded incorrectly so that water cannot reach all surfaces.
Spray arms do not turn freely because of incorrect arrangement of the load.
The filters are dirty or not correctly installed.
The quantity of detergent is too little or missing.
Limescales particles on the dishes
The salt container is empty.
The water softener is adjusted on a wrong level.
The salt container cap is not closed correctly.
The dishes are wet and dull
No rinse aid has been used.
The rinse aid dispenser is empty.
There are streaks, milky spots or
a bluish coating on glasses and
dishes
Decrease the rinse aid dosage.
Dry water drop signs on glasses
and dishes
Increase rinse aid dosage.
The detergent can be the cause.
Technical data
Dimensions
Width cm
60
Height cm
85
Depth cm
61
Electrical connection - Voltage -
Overall power - Fuse
Information on the electrical connection is given on the rating plate on the
inner edge of the dishwasher door.
Water supply pressure
Minimum
0,5 bar (0,05 MPa)
Maximum
8 bar (0,8 MPa)
Capacity
Place settings
12
Environment concerns
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
contact your local council, your household waste disposal
service or the shop where you purchased the product.
The packaging materials are environmentally friendly and
can be recycled. The plastic components are identified by
markings, e.g. >PE<, >PS<, etc. Discard the packaging
materials in the applicable container at the community
waste disposal facilities.
13