Zanussi ZDF2020 Product Manaul - Page 5

Use of the appliance, Setting the water softener - no power

Get Zanussi ZDF2020 PDF manuals and user guides View all Zanussi ZDF2020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 5 highlights

Programme Programme duration (in minutes) 130-140 12 Energy consumption (in kWh) 1,0-1,2 0,1 Water consumption (in litres) 14-16 5 The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of procedure: 1. Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener. 2. Fill the salt container with dishwasher salt. 3. Fill the rinse aid dispenser with rinse aid. 4. Load cutlery and dishes into the dishwasher. Setting the water softener 5. Set the correct washing programme for the type of load and soil. 6. Fill the detergent dispenser with the correct quantity of detergent. 7. Start the washing programme. If you use detergent tablets, refer to the chapter 'Use of detergent'. The water softener removes minerals and salts from the water supply. Minerals and salts can have bad effect on the operation of the appliance. Water hardness is measured in equivalent scales: • German degrees (dH°). • French degrees (°TH). • mmol/l (millimol per litre - international unit for the hardness of water). • Clarke. Adjust the water softener to the water hardness in your area. If necessary, contact your local water authority. 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
Programme
Programme duration
(in minutes)
Energy consumption
(in kWh)
Water consumption
(in litres)
130-140
1,0-1,2
14-16
12
0,1
5
The pressure and temperature of the water, the var-
iations of power supply and the quantity of dishes
can change these values.
Use of the appliance
Refer to the following instructions for each step of pro-
cedure:
1.
Make a check if the water softener level is correct for
the water hardness in your area. If necessary set the
water softener.
2.
Fill the salt container with dishwasher salt.
3.
Fill the rinse aid dispenser with rinse aid.
4.
Load cutlery and dishes into the dishwasher.
5.
Set the correct washing programme for the type of
load and soil.
6.
Fill the detergent dispenser with the correct quantity
of detergent.
7.
Start the washing programme.
If you use detergent tablets, refer to the chapter 'Use
of detergent'.
Setting the water softener
The water softener removes minerals and salts from the
water supply. Minerals and salts can have bad effect on
the operation of the appliance.
Water hardness is measured in equivalent scales:
•
German degrees (dH°).
•
French degrees (°TH).
•
mmol/l (millimol per litre - international unit for the
hardness of water).
• Clarke.
Adjust the water softener to the water hardness in your
area. If necessary, contact your local water authority.
5