Zanussi ZDF2020 Product Manaul - Page 6
Use of dishwasher salt - manual
View all Zanussi ZDF2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Water hardness °dH °TH mmol/l 51 - 70 91 - 125 9,1 - 12,5 43 - 50 76 - 90 7,6 - 9,0 37 - 42 65 - 75 6,5 - 7,5 29 - 36 51 - 64 5,1 - 6,4 23 - 28 40 - 50 4,0 - 5,0 19 - 22 33 - 39 3,3 - 3,9 15 - 18 26 - 32 2,6 - 3,2 11 - 14 19 - 25 1,9 - 2,5 4 - 10 7 - 18 0,7 - 1,8 < 4 < 7 < 0,7 1) No use of salt required. Clarke 64 - 88 53 - 63 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 5 - 12 < 5 Water hardness setting manually electronically 2 10 2 9 2 8 2 7 2 6 2 5 1 4 1 3 1 2 11) 11) You must set the water softener manually and electronically. Manual adjustment The appliance is set at the factory at position 2. 1 2 Set switch to position 1 or 2. 1. Press and hold the start/cancel button. Turn the programme knob clockwise until the programme marker agrees with the first washing programme on the control panel. 2. Release the start/cancel button when the on/off indicator light and the start/cancel indicator light start to flash. - At the same time, the end indicator light flashes to show the level of the water softener. Example: 5 flashes, pause, 5 flashes, pause, etc... = level 5 3. Press the start/cancel button one time to increase the water softener level by one step. The end indicator light shows the new level. 4. Turn the programme knob to the off position to save the operation. Electronic adjustment The water softener is set at the factory at level 5. Use of dishwasher salt Caution! Only use dishwashers salt. Types of salt that are not applicable for dishwashers cause damage to the water softener. 6