Zanussi ZDF2020 Product Manaul - Page 7
Use of rinse aid
View all Zanussi ZDF2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 2 3 4 Fill the salt container with 1 litre of water (only the first operation). Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: 1 2 5 6 It is normal that water overflows from the salt container when you fill it with salt. Make sure that there is no grain of salt outer of the salt compartment. Salt which stays on the tank for a while drills the tank. It is recommended to start a washing programme immediately after you fill the salt container. This prevents of corrosion because of spilled salt. When you set electronically the water softener to level 1, the salt indicator light does not stay on. Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the appliance. Adjusting the dosage of rinse aid The rinse aid dial is set at the factory at position 3. To increase or decrease M A X the dosage refer to 'What 2 34 to do if...' + + 1 1 M A X 2 34 3 4 7