Zanussi ZDF3023 Product Manaul - Page 11

A 3 To remove filters (B) and (C), turn the handle counterclockwise and remove. Pull apart filter (B) and (C). Wash the filters with water. 4 Remove filter (A). Wash the filter with water. D An incorrect position of the filters can cause bad washing results and damage to the appliance. Cleaning the spray arms Do not remove the spray arms. If the holes in the spray arms are clogged, remove remaining parts of soil with a thin pointed object. External cleaning Clean the appliance with a moist soft cloth. Only use neutral detergents. Do not use abrasive products, abrasive cleaning pads or solvents. A 5 6 Put filter (A) to its ini- Assemble filters (B) tial position. Make and (C). Put them in- sure that it assembles to position in filter correctly under the (A). Turn the handle two guides (D). clockwise until it locks. Troubleshooting The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If not, contact the service. With some problems, the display shows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the wa- ter. • - The anti-flood device is on. Warning! Deactivate the appliance before you make the checks. Turn the programme knob until the programme marker is aligned with the off position. www.zanussi.com 11