Zanussi ZDF3023 Product Manaul - Page 5

Programme1) Degree of soil Type of load Programme phases Duration (min) Energy (kWh) Water (l) Fresh soil Wash 65 °C 30 0.9 9 Crockery and cut- Rinse 5) lery 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values. 2) The appliance senses the degree of soil and the quantity of items in the baskets. It automatically adjusts the temperature and quantity of the water, the energy consumption and the programme duration. 3) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy consumption for crockery and cutlery with normal soil. 4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this programme. 5) With this programme you can wash a load with fresh soil. It gives good washing results in a short time. Information for test institutes For all the necessary information for test performance. send an email to: [email protected] Write down the product number (PNC) that is on the rating plate. Options Multitab function Activate this function only when you use the combi detergent tablets. This function deactivates the flow of rinse aid and salt. The related indicators are off. The programme duration can increase. Activating the Multitab function Activate or deactivate the Multitab function before the start of a programme. You cannot activate or deactivate this function while a programme operates. 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to 'SETTING AND STARTING A PROGRAMME'. 3. Press Multitab, the Multitab indicator comes on. The function stays on until you deactivate it. Press Multitab, the Multitab indicator goes off. If you stop to use the combi detergent tablets, before you start to use separately detergent, rinse aid and dishwasher salt, do these steps: 1. Deactivate the Multitab function. 2. Set the water softener to the highest level. 3. Make sure that the salt container and the rinse aid dispenser are full. 4. Start the shortest programme with a rinsing phase, without detergent and without dishes. 5. Adjust the water softener to the water hardness in your area. 6. Adjust the released quantity of rinse aid. www.zanussi.com 5