Zanussi ZDF3023 Product Manaul - Page 9
The programme duration flashes in
View all Zanussi ZDF3023 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 2 A A 3 Put the detergent or the tablet in compartment (A). B If the programme has 4 a prewash phase, put a small quantity of detergent in compartment (B). Detergent tablets do not fully dissolve with short programmes and detergent residues can stay on the dishes. We recommend that you use detergent tablets with long programmes. Setting and starting a programme Setting mode The appliance must be in setting mode to: • Start a programme. • Set the level of the water softener. www.zanussi.com • Activate the rinse aid dispenser when the Multitab function is on. Turn the programme knob until the programme marker is aligned with a programme on the control panel: • If the programme duration flashes in the dis- play, the appliance is in setting mode. • If the programme duration in the display is not flashing, the appliance is not in setting mode. To put the appliance in setting mode, press and hold Start until the programme duration flashes in the display and the phase indicators for the programme come on. Starting a programme without delay start 1. Open the water tap. 2. Close the appliance door. 3. Turn the programme knob until the pro- gramme marker is aligned with the programme you want to set. Make sure that the appliance is in setting mode. • The programme duration flashes in the display. • The phase indicators of the set pro- gramme come on. 4. Press Start. The programme starts. • The programme duration stops flashing in the display and starts to decrease with steps of 1 minute. • Only the indicator of the phase in operation stays on. Starting a programme with delay start 1. Set the programme. 2. Press Delay again and again until the dis- play shows the delay time you want to set (from 1 to 19 hours). • The delay time flashes in the display. 3. Press Start. The countdown starts. • The delay time stops flashing in the dis- play. The countdown starts to decrease with steps of 1 hour. • The phase indicators of the set programme go off. 9