Zanussi ZDF3023 Product Manaul - Page 14
Technical information, Environment concerns, Installation
View all Zanussi ZDF3023 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
3. Release Start when the display shows the setting of the water softener. 4. Turn the programme knob counterclockwise until the programme marker is aligned with the second washing programme on the control panel. 5. The display shows the setting of the rinse aid dispenser. Technical information Off On 6. Press Start to change the setting. 7. To confirm the setting, turn the programme knob until the programme marker is aligned with the off position. Dimensions Width / Height / Depth (mm) 600 / 850 / 610 Electrical connection Refer to the rating plate. Voltage 220-240 V Frequency 50 Hz Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 ) Water supply 1) Cold water or hot water2) max. 60 °C Capacity Place settings 12 Power consumption Left-on mode 0.99 W Off-mode 0.1 W 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the Installation environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local council, your household waste disposal service or the shop where you purchased the product. • Discard correctly the packaging material. Recycle the materials with the symbol . Warning! Refer to "SAFETY INFORMATION". Installation under a kitchen counter Put the appliance adjacent to a water tap and a water drain. Remove the worktop of the appliance to install it under a sink unit or a kitchen counter. 14 www.zanussi.com