Zanussi ZDT12002FA Product Manaul - Page 12
Technical information
View all Zanussi ZDT12002FA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Problem Limescale particles on the dishes. Whitish streaks and stains or bluish layers on glasses and dishes. Dry water drop stains on glasses and dishes. The dishes are wet. The dishes are wet and matt. Possible cause The programme was not applicable for the type of load and soil. Incorrect position of the items in the baskets. Water could not wash all items. The spray arms could not turn freely. The quantity of detergent was not sufficient. There was no detergent in the detergent dispenser. The salt container is empty. The set level of the water softener is incorrect. The cap of the salt container is loose. The released quantity of rinse aid is too much. Possible solution Make sure that the programme is applicable for the type of load and soil. Make sure that the position of the items in the baskets is correct and that the water can easily wash all items. Make sure that the position of the items in the baskets is correct and does not cause the blockage of the spray arms. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Make sure that you add detergent in the dispenser before you start a programme. Make sure that there is dishwasher salt in the salt container. Make sure that the set level of the water softener agrees with the water hardness in your area. Tighten the cap. Decrease the released quantity of rinse aid . The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. The released quantity of rinse aid was Increase the released quantity of rinse aid. not sufficient . The quality of the detergent can be the Try a different brand of detergent. cause. • The programme had no drying phase. For better drying results, keep the door • The programme had a low tempera- ajar for some minutes. ture drying phase. The rinse aid dispenser is empty. Make sure that there is rinse aid in the rinse aid dispenser. The quality of the rinse aid can be the cause. Try a different brand of rinse aid. Technical information Dimensions Width / Height / Depth (mm) 596 / 818-898 / 555 12