Zanussi ZDT12002FA Product Manaul - Page 7
Daily use
View all Zanussi ZDT12002FA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
1 2 1 2 max 3 4 Put 1 litre of water in the salt container (only for the first time). M A X 2 34 + 1 3 4 max 5 6 Filling the rinse aid dispenser Caution! Only use rinse aid for dishwashers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. Daily use + M A X A + 2 34 1 M A X 2 34 1 Fill the rinse aid dispenser when the lens (A) is clear. To adjust the released quantity of rinse aid, turn the selector between position 1 (lowest quantity) and position 4 (highest quantity). 1. Open the water tap. 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to 'SETTING AND STARTING A PROGRAMME'. • If the salt indicator is on, fill the salt container. 3. Make sure that there is rinse aid in the rinse aid dispenser. 4. Load the baskets. 5. Add the detergent. 6. Set and start the correct programme for the type of load and soil. 7