Zanussi ZDT12002FA Product Manaul - Page 5
Options, Before first use - dishwasher
View all Zanussi ZDT12002FA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Programme 1) Duration (min) 12 Energy (kWh) 0,1 Water (l) 5 1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the programme duration and the consumption values. Options Acoustic signals The acoustic signals operate in these conditions: • When the programme is completed. • A malfunction occurs to the appliance. Factory setting: on. You can deactivate the acoustic signals. Deactivating the acoustic signals 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to 'SETTING AND STARTING A PROGRAMME'. 3. Press and hold the programme button until the pro- gramme indicator (A) flashes and the programme indicator (B) comes on. 4. Press immediately the programme button. • The programme indicator (A) comes on with a fixed light. • The programme indicator (B) starts to flash. 5. Wait until the programme indicator (A) goes off and the end indicator comes on (the programme indicator (B) continues to flash). • The acoustic signals are on. 6. Press the programme button. The end indicator goes off. Before first use • The acoustic signals are off. 7. Deactivate the appliance to confirm. Activating the acoustic signals 1. Refer to 'Deactivating the acoustic signals', step (1) through (4). 2. Wait until the programme indicator (A) goes off. The end indicator is off and programme indicator (B) continues to flash. • The acoustic signals are off. 3. Press the programme button. The end indicator comes on. • The acoustic signals are on. 4. Deactivate the appliance to confirm. Half-load Activate or deactivate the function before the start of a programme. You cannot activate or deactivate this function while a programme operates. Set this function when you want to wash a small quantity of tableware and cookware. The function decreases the programme duration and the consumption of energy and water. Load the upper basket and the lower basket and decrease the quantity of detergent. 1. Make sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. Contact your local water authority to know the water hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open the water tap. 5. Processing residues can stay in the appliance. Start a programme to remove them. Do not use detergent and do not load the baskets. Adjusting the water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neutralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions. Refer to the table to adjust the water softener to the right level. It makes sure that the water softener uses the correct quantity of dishwasher salt and water. 5