Zanussi ZWG6120K Product Manaul - Page 11

Press the button Start / Pause again.

Get Zanussi ZWG6120K PDF manuals and user guides View all Zanussi ZWG6120K manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

• Press the Start / Pause button : The appliance starts the countdown. When the countdown is completed, the programme starts automatically. You can change or cancel the delay start before you press the Start button. After pressing the Start button you can only cancel the delay. To cancel the delay start: 1. Press the Start / Pause button to set the appliance to PAUSE. 2. Press the Delay Start button one time, the indicator of the set delay goes off. 3. Press the Start / Pause button again to start the programme immediately. Interruption of a programme 1. Press the button Start / Pause. The indica- tor flashes. 2. Press the button Start / Pause again. The washing programme continues. Cancel a programme 1. Turn the programme knob to to cancel the programme and to deactivate the appliance. 2. Turn the programme knob again to activate the appliance. You can set a new washing programme then. The appliance does not drain the water. Changing the options You can change only some options before they operate. 1. Press the button Start / Pause. The indica- tor flashes. 2. Change the options. 3. Press the button Start / Pause again. The programme continues. Open the door While a programme or the delay start operates, the appliance door is locked. Caution! If the temperature and level of the water in the drum are too high, you cannot open the door. www.zanussi.com Open the appliance door when the delay start operates: 1. Press the button Start / Pause to set the appliance to PAUSE. 2. Wait for some minutes and then open the appliance door. 3. Close the appliance door. 4. Press the button Start / Pause and the de- lay start continues to operate. To open the appliance door when the programme operates: 1. Turn the programme knob to to deacti- vate the appliance. 2. Wait for some minutes and then open the appliance door. 3. Close the appliance door. 4. Set the programme again. At the end of the programme The appliance stops automatically. • The Start / Pause button indicator goes off. • The End indicator is on. 1. Turn the programme knob to to deacti- vate the appliance. 2. Remove the laundry from the appliance. Make sure that the drum is empty. 3. Keep the door ajar, to prevent the mildew and odours. 4. Close the water tap. The washing programme is completed, but there is water in the drum: - The drum turns regularly to prevent the crea- ses in the laundry. - The door stays locked and the start button indicator flashes. - You must drain the water before you can open the door. To drain the water: 1. Set the Drain or the Spin programme. 2. Press the Start / Pause button. The appli- ance drains the water and spins. 3. When the programme is completed: - The Start / Pause button indicator goes off and the End indicator is on. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
•
Press the Start / Pause button :
The appliance starts the countdown.
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the Start button. After
pressing the Start button you can only cancel
the delay.
To cancel the delay start:
1.
Press the Start / Pause button to set the
appliance to PAUSE.
2.
Press the Delay Start button one time, the
indicator of the set delay goes off.
3.
Press the Start / Pause button again to
start the programme immediately.
Interruption of a programme
1.
Press the button Start / Pause. The indica-
tor flashes.
2.
Press the button Start / Pause again. The
washing programme continues.
Cancel a programme
1.
Turn the programme knob to
to cancel
the programme and to deactivate the appli-
ance.
2.
Turn the programme knob again to activate
the appliance. You can set a new washing
programme then.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1.
Press the button Start / Pause. The indica-
tor flashes.
2.
Change the options.
3.
Press the button Start / Pause again. The
programme continues.
Open the door
While a programme or the delay start operates,
the appliance door is locked.
Caution!
If the temperature and level of
the water in the drum are too high, you
cannot open the door.
Open the appliance door when the delay
start operates:
1.
Press the button Start / Pause to set the
appliance to PAUSE.
2.
Wait for some minutes and then open the
appliance door.
3.
Close the appliance door.
4.
Press the button Start / Pause and the de-
lay start continues to operate.
To open the appliance door when the
programme operates:
1.
Turn the programme knob to
to deacti-
vate the appliance.
2.
Wait for some minutes and then open the
appliance door.
3.
Close the appliance door.
4.
Set the programme again.
At the end of the programme
The appliance stops automatically.
•
The Start / Pause button indicator goes off.
•
The End indicator is on.
1.
Turn the programme knob to
to deacti-
vate the appliance.
2.
Remove the laundry from the appliance.
Make sure that the drum is empty.
3.
Keep the door ajar, to prevent the mildew
and odours.
4.
Close the water tap.
The washing programme is completed,
but there is water in the drum:
–
The drum turns regularly to prevent the crea-
ses in the laundry.
–
The door stays locked and the start button
indicator flashes.
–
You must drain the water before you can
open the door.
To drain the water:
1.
Set the Drain or the Spin programme.
2.
Press the Start / Pause button. The appli-
ance drains the water and spins.
3.
When the programme is completed:
–
The Start / Pause button indicator goes
off and the End indicator is on.
11
www.zanussi.com