Zanussi ZWG6120K Product Manaul - Page 15

Problem Possible solution Make sure that the appliance door is closed. Make sure that there is not a damaged fuse in the household fuse box. Make sure that the button Start/Pause has been pressed. If the delay start is set, cancel the setting or wait for the end of the countdown. Make sure that the programme knob is in the correct position. Deactivate the Child Lock function if it is on. The appliance does not Make sure that the water tap is opened. fill with water. Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. Make sure that the water tap is not clogged. Make sure that the filter of the inlet hose and the filter of the valve are not clogged. Refer to 'Care and cleaning'. Make sure that the inlet hose has no kinks or bends. Make sure that the connection of the water inlet hose is correct. The appliance does not Make sure that the sink spigot is not clogged. drain the water. Make sure that the water drain hose has no kinks or bends. Make sure that the connection of the water drain hose is correct. Set the drain programme if you set a programme without the drain phase. Set the drain programme if you set an option which ends with water in the drum. If above mentioned solutions do not help, contact the Service (as the filter of the drain pump may be clogged). The spin phase does not operate or the washing cycle lasts longer than usually. Adjust manually the items in the drum and start the spin phase again. This problem may be caused by balance problems. Set the spin programme. Set the drain programme if you set an option which ends with water in the drum. If above mentioned solutions do not help, contact the Service (as the filter of the drain pump may be clogged). There is water on the floor. Make sure that the couplings of the water hoses are tight and there are no water leakages. Make sure that the water inlet hose and the water drain hose has no damages. Make sure you use the correct detergent and the correct quantity of it. You cannot open the appliance door. Make sure that the washing programme is finished. Set the drain or the spin programme if there is water in the drum. The appliance makes an Make sure that the leveling of the appliance is correct. Refer to 'Installation in- unusual noise. struction'. www.zanussi.com 15