Zenith D60WLCD Operation Manual - Page 34

Aspect Ratio 1 Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Special menu. Or press RATIO button to instantly access the Aspect Ratio menu. 2 Press ENTER or the RIGHT arrow button to activate the Special menu. 3 Use the UP/DOWN arrows to choose Aspect Ratio. 4 Press ENTER or the RIGHT arrow button to move into the Aspect Ratio selection menu. Use the UP/DOWN arrow buttons to select the right ratio for your viewing environment: • Normal - Choose when you want to view a picture with an original 4:3 aspect ratio, with black bars appearing at both the left and right sides. • Wide - Choose when you want to adjust the picture horizontally, in a linear proportion to fill the entire screen. (useful for viewing 4:3 formatted DVDs.) • Panorama - Choose when you want to adjust the picture in a non-linear proportion, that is, more enlarged at both sides, to create a spectacular view. • Zoom1 - Choose when you want to view the picture without any alteration. However the top and bottom portion of the picture will be cropped. • Zoom2 - Choose when you want the picture to be altered, both horizontally enlarged and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage. 5 Press EXIT to save and return to TV viewing or press the ENTER button to save and return to the previous menu. Lets you choose the way that an analog picture with a 4:3 aspect ratio is displayed on your TV with a 16:9 ratio. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed according to your preference. tv vcr cable dvd sat mode light power source tv video front comp1 comp2 rgb 123 456 789 0 enter mute ratio vol ch swap pipch- pipch+ pip 2/4/5 1 1 menu flashbk surf freeze 1/3/4 2/4 exit 5 record stop skip pause rew play ff PAGE 34 206-3726