Zenith D60WLCD Operation Manual - Page 54

Troubleshooting, cont'd Remote control doesn't work. Menu options can't be changed or selected. No picture or sound when any non-cable source is selected. Weak or no Stereo Sound when using a stereo VCR. The PIP inset is black or lacks contrast. The PIP inset is "snow" when the source is Antenna 1. Time is incorrect. • Make sure the batteries are fresh and installed properly. • Try unplugging your Entertainment Machine for a few minutes, then plug it back in. • Check to see if the source equipment has been turned on. • Make sure that the connections are secure on the back of your Entertainment Machine and on the source equipment. • Check to see if all the connections are secure. • Look in the Audio mode menu to see if all the settings are correct. • You are using channel 3 or 4 to view your VCR. No stereo sound is present under that decision. • You might want to adjust the PIP picture settings under the PIP menu. • Check that all the wires are connected properly. • Check to see if your input source for PIP is set correctly. •Look to see if the TV/VCR button on your VCR has the TV selected or change the PIP to another source. • Make sure the time was set initially. Probably power was lost. PAGE 54 206-3726