Zenith L27W46 Operating Guide - Page 14

Installation DTV Setup - To watch digitally broadcast programs, purchase and connect a digital set-top box. 1 Connections Connect the digital set-top box video outputs to the COMPONENT (Y, PB, PR) jacks and connect the digital set-top box audio outputs to the AUDIO jacks. Viewing Setup 1. Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) 2. Use the TV/VIDEO or MULTIMEDIA button on the remote control to select Component 1. PC Setup Y PB PR (R) AUDIO (L) DTV Receiver (Set-top Box) - After setup, be sure to select RGB-PC source on TV. Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2. Connect the TV to the PC with the PC cable. 3. Connect the PC audio output to the TV's PC SOUND input. Viewing Setup 1. Turn on the PC. 2. Use the TV/VIDEO or MULTIMEDIA button on the remote control to select PC. Monitor Display Specifications Resolution 640x480 Horizontal Vertical Frequency(kHz) Frequency(Hz) 31.47 60 35.00 66.67 37.50 75 800x600 35.16 37.88 48.08 46.88 56.25 60 72.19 75 NOTE Connect the signal cable (DVI-D cable, Not DVI to D-Sub cable) from the DVI output socket of the PC to the DVI input socket of the set when using a PC with DVI output. In some video cards, DVI-Analog output may not be supported. 48.36 60 1024x768 56.48 70 60.02 75 1280x768 47.78 60 1280x720 44.70 60 NOTES a. For optimum picture quality, use standard VESA 1280x720 computer output at a 60Hz refresh rate (In some video cards, this mode may not be supported.) . Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). b. If the message "Out of range" appears on the screen, adjust the PC output to a format listed in the 'Monitor Display Specifications' chart above. c. The synchronization input form for Horizontal and Vertical frequencies is separate. DPM (Display Power Management) mode If the PC goes to power saving mode, the monitor automatically switches to DPM mode. If you don't use the PC cable provided, DPM mode may not work. 14