Zenith L27W46 Operating Guide - Page 31

Channel Add/Del Command:m

Get Zenith L27W46 PDF manuals and user guides View all Zenith L27W46 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

09. Color (Command:i) G To adjust the screen color. You can also adjust color in the Picture menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 • Refer to 'Real data mapping 1'. See page 30. Acknowledgement [i][ ][Set ID][ ][OK][Data][x] 10. Tint (Command:j) G To adjust the screen tint. You can also adjust tint in the Picture menu. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data Red : 0 ~ Green : 64 • Refer to 'Real data mapping 1'. See page 30. Acknowledgement [j][ ][Set ID][ ][OK][Data][x] 11. Sharpness (Command:k) G To adjust the screen sharpness. You can also adjust sharpness in the Picture menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 • Refer to 'Real data mapping 1'. See page 30. Acknowledgement [k][ ][Set ID][ ][OK][Data][x] 12. OSD Select (Command:l) G To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 0: OSD off 1: OSD on Acknowledgement [l][ ][Set ID][ ][OK][Data][x] External Control Device Setup 14. Tune Command (Command:m a) G Tune channel to following Physical/major/minor number. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][Cr] Data0: Channel Number Min : 1 ~ Max : 0x7D(transmit by Hexadecimal code) Data1:TV-0, CATV-1 (transmit by Hexadecimal code) Acknowledgement [a][ ][Set ID][ ][OK][Data0][Data1][x] [a][ ][Set ID][ ][NG][Data0][x] 15. Channel Add/Del (Command:m b) G To add and delete the channels. Transmission [m][b][ ][Set ID][ ][Data 0][Cr] Data0: (Channel)Delete-0, (Channel)Add-1 Acknowledgement [b][ ][Set ID][ ][OK][Data0][x] [b][ ][Set ID][ ][NG][Data0][x] 16. Key (Command:m c) G To send IR remote key code. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data: Key code- Refer User's Manual Acknowledgement [c][ ][Set ID][ ][OK][Data][x] 13. Key Lock (Command:m) G To lock the remote control and the front panel controls on the TV. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 0: Lock off 1: Lock on Acknowledgement [m][ ][Set ID][ ][OK][Data][x] • If you're not using the remote control and front panel controls on the monitor, use this mode. When main power is on/off, remote control lock is released. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
31
External Control Device Setup
External Control Device Setup
09. Color (Command:i)
G
To adjust the screen color.
You can also adjust color in the Picture menu.
T
ransmission
Data
Min : 0 ~ Max : 64
•
Refer to
‘
Real data mapping 1
’
. See page 30.
[k][i][
][Set ID][
][Data][Cr]
Acknowledgement
[i][
][Set ID][
][OK][Data][x]
10. Tint (Command:j)
G
To adjust the screen tint.
You can also adjust tint in the Picture menu.
T
ransmission
Data
Red : 0 ~ Green : 64
•
Refer to
‘
Real data mapping 1
’
. See page 30.
[k][j][
][Set ID][
][Data][Cr]
Acknowledgement
[j][
][Set ID][
][OK][Data][x]
13. Key Lock (Command:m)
G
To lock the remote control and the front panel controls on
the TV.
T
ransmission
[k][m][
][Set ID][
][Data][Cr]
Acknowledgement
Data
0: Lock off
1: Lock on
•
If you
’
re not using the remote control and front panel controls
on the monitor, use this mode. When main power is on/off,
remote control lock is released.
[m][
][Set ID][
][OK][Data][x]
14. Tune Command (Command:m
a)
G
Tune channel to following Physical/major/minor number.
T
ransmission
[m][a][
][Set ID][
][Data0][
][Data1][Cr]
Acknowledgement
[a][
][Set ID][
][OK][Data0][Data1][x]
[a][
][Set ID][
][NG][Data0][x]
G
To adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
T
ransmission
11. Sharpness (Command:k)
Data
Min: 0 ~ Max: 64
•
Refer to
‘
Real data mapping 1
’
. See page 30.
[k][k][
][Set ID][
][Data][Cr]
Acknowledgement
[k][
][Set ID][
][OK][Data][x]
12. OSD Select (Command:l)
G
To select OSD (On Screen Display) on/off.
T
ransmission
[k][l][
][Set ID][
][Data][Cr]
Acknowledgement
Data
0: OSD off
1: OSD on
[l][
][Set ID][
][OK][Data][x]
Data0: Channel Number
Min : 1 ~ Max : 0x7D(transmit by Hexadecimal code)
Data1:TV-0, CATV-1 (transmit by Hexadecimal code)
15. Channel Add/Del (Command:m
b)
G
To add and delete the channels.
T
ransmission
[m][b][
][Set ID][
][Data 0][Cr]
Acknowledgement
[b][
][Set ID][
][OK][Data0][x]
[b][
][Set ID][
][NG][Data0][x]
Data0: (Channel)Delete-0, (Channel)Add-1
16. Key (Command:m
c)
G
To send IR remote key code.
T
ransmission
[m][c][
][Set ID][
][Data][Cr]
Acknowledgement
[c][
][Set ID][
][OK][Data][x]
Data: Key code- Refer User
’
s Manual