Zenith L27W46 Operating Guide - Page 16

Operation Channel Menu Options Memorizing the Channels with EZ scan - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either over-the-air or from a cable-type service provider. 1. Press the MENU button and then use D / E button to select the Channel menu. 2. Press the G button and then use D / E button to select EZ Scan. 3. Press the G button to begin the channel search. Channel EZ Scan Manual prog. Favorite ch. To start • Wait for auto program to complete the channel search cycle before choosing a channel. The TV scans for over-the-air channels and then channels provided by a cable service. D E FG OK MENU NOTES • When the channel search is complete, use the D / E buttons to review the memorized channels. • If you press the ENTER button in auto programming, the function will stop and only channels programming up to that time will remain. • Auto program function can memorize only the channels which are being received at that time. Add/Delete Channels with Manual Program - You can manually include or erase individual channels. 1. Press the MENU button and then use D / E button to select the Channel menu. 2. Press the G button and then use D / E button to select Manual prog.. 3. Press the G button and then use F / G button to select a channel you want to add to memory or erase. 4. Press the E button and then use F / G button to select Memory (add) or Erase (delete). 5. Press the ENTER button to save. The current channel is added to Memory or Erased from the channel list. The current channel number is displayed. Channel EZ Scan Manual prog. Favorite ch. TV 30 Memory D E FG OK MENU Â EXIT 16