Zenith SL-4305-WH User Guide - Page 1

Motion Sensing Porch Light SL-4305 Features • Light comes on when motion is detected. • Automatically turns light off. • Photocell keeps the light off during daylight hours. This package includes: • Porch Light • Easy to use Universal Mounting Bracket • Mounting Hardware • Wire Nuts • Lens Shield Requirements • The light control requires 120 volts AC. • If you want to use Manual Mode, the control must be wired through a switch. • Some electrical codes require installation by a qualified electrician. Before installation, record the model number listed inside the fixture.Attach receipt in case of possible warranty issues. Model Number: © 2007 HeathCo LLC OPERATION Mode: On-Time Works: Day Night Test 5 Seconds xx Auto 1, 5, or 10 Min x Manual To Dawn* x * resets to Auto Mode at dawn. Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate. TEST Set the ON-TIME switch on the sensor to TEST. ON-TIME TEST 1 5 10 MIN AUTO Set ON-TIME switch to 1, 5, or 10 minutes. ON-TIME TEST 1 5 10 MIN MANUAL MODE Manual mode only works at night because daylight returns the sensor to AUTO. Flip the light switch off for one second then back on to toggle 1 Second OFF between AUTO and MANUAL then... MODE. Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position. ... back on. Mode Switching Summary TEST AUTO MANUAL MODE ON-TIME Switch at 1, 5, or 10 minutes Flip light switch off for one second then back on* * If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode. 598-1184-04