Zenith SL-4305-WH User Guide - Page 2
Install Universal Mounting, Bracket, Disassemble Light Fixture, Wiring Light Fixture
UPC - 016963430556
View all Zenith SL-4305-WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Disassemble Light Fixture 1. Remove two decorative nuts from light fixture cover. 2. Remove cover from base. Install universal Mounting Bracket For best performance, mount the fixture at least 8 feet (2.4 m) above the ground. Light Fixture Base WARNING: Turn power off at circuit breaker or fuse. 1. Tighten the two fixture screws finger tight. SENSITIVITY LO - M - HI TESOTN1-T5IM1E0 MIN 2. Attach universal mounting bracket to junction box securely with the two screws provided. Light Fixture Cover Junction Box Decorative Nut 3. Remove two decorative nuts from fixture screws in universal mounting bracket. 4. Remove universal mounting bracket from base. Universal Mounting Bracket Junction Box Screw Fixture Screw (Tightened Finger Tight) Decorative Nut SENSITIVITY LO - M - HI TESOTN1-T5IM1E0 MIN Universal Mounting Bracket Wiring Light Fixture 1. Connect the junction box wires and the fixture wires together as shown in the following diagrams. CAUTION: DO NOT remove wire connector from RED wire or connect the RED wire unless you want to control other lights from this motion sensor fixture. 2. Twist and secure wires with wire nuts. Note: If you have a metal junction box use the recommended grounding method shown in the following illustration.If you are uncertain about the grounding method, consult your local building code. 598-1184-04