Zenith SL-5410-GR User Guide - Page 1
Zenith SL-5410-GR - Heath - 110-Degree Motion Sensing Security Light Manual
UPC - 016963541009
View all Zenith SL-5410-GR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
OPERATION Motion Sensor Light Control As an ENERGY STAR® Partner, Heath®/Zenith has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. This product is ENERGY STAR® compliant when used with 120 Watt bulbs. Models 5408 / 5410 Mode: Test Auto Manual On-Time 5 Seconds 1, 5, or 10 Min Until Dawn* Works: Day Night xx x x * resets to Auto Mode at dawn. Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate. TEST Put the ON-TIME switch on the bottom ON-TIME of the sensor in the TEST position. 10 5 1 TEST AUTO Features • Turns on lighting when motion is detected. • Automatically turns lighting off. • Photocell keeps the lighting off during daylight hours. • 5410 models have Flash Alert feature (light flashes on then off twice before turning on full brightness). This package includes: Put the ON-TIME switch in the 1, 5, or 10 minute position. ON-TIME 10 5 1 TEST MANUAL MODE Manual mode only works at night because daylight returns the sensor to AUTO. Lamp Holders Cover Plate 4 Mounting Screws (2 sizes) Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE. 1 Second OFF then... Sensor Light Control Gasket 2 Wire Connectors Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position. ... back on. Mode Switching Summary Requirements • The light control requires 120-volts AC. • If you want to use Manual Mode, the control must be wired through a switch. • Some codes require installation by a qualified electrician. • This product is intended for use with a junction box marked for use in wet locations. • The backplate has knockouts so the sensor can be mounted on most junction boxes. • In some applications a universal adaptor plate may be needed. Adaptors are available at home centers and electrical supply stores. TEST AUTO MANUAL MODE Move ON-TIME Switch to 1, 5, or 10 minutes Flip light switch off for one second then back on* * If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode. © 2007 HeathCo LLC 598-1303-01