Zenith SL-6107-WH User Guide - Page 12
Troubleshooting
UPC - 169636107122
View all Zenith SL-6107-WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
TROUBLESHOOTING Light will not come on: • Circuit breaker is off. Turn breaker back on. • Bulb is burned out. Replace light bulb. • Photo Sensitivity is set to DARK. Rotate the adjustment clockwise towards the LIGHT position. • Control is in the "Off" position. Set to Auto or On. • Control may be wired incorrectly. See Troubleshooting Wiring Con- nections, page 7. Light will not turn off: • Control is in the "On" position. Set to Auto or Off. • Control time period set too long. Set to shorter time period. • Control may be wired incorrectly. See Troubleshooting Wiring Con- nections, page 7. Remote switch does not work: • The remote switch only works to turn the light on in the Auto mode. Put sensor in the Auto mode. • Control may be wired incorrectly. See Troubleshooting Wiring Con- nections, page 7. In Auto mode, light comes on randomly: • Objects in detection area which heat and cool, such as air vents or appliances, may trigger the control. Also, check wiring. See Troubleshooting Wiring Connections, page 7. • The remote switch may have been flipped on. In the Auto mode, light does not turn on: • If there is too much light already in the room, the light may not come on. Turn the Photo control clockwise towards the any light level position. -12- 595-4514-15