Zenith SL-6107-WH User Guide - Page 8

SPECIAL INSTALLATIONS For single switch installations, connect the wall switch as shown here. SINGLE SWITCH INSTALLATION BLACK BLACK FROM POWER SOURCE OFF AUTO ON BROWN RED SL-6107 WHITE BLACK WHITE If you want to have motion sensors at both 3-way switches, connect them as shown below. The minimum wattage may increase to 100 W for fluorescent and 50 W for incandescent lighting. EXISTING LIGHT SWITCH CONFIGURATION FROM POWER SOURCE WHITE WHITE WHITE BLACK *COMMON RED (In Wall) *COMMON BLACK BLACK FROM WHITE POWER SOURCE 2 SWITCH INSTALLATION WHITE WHITE BROWN BLACK BROWN BLACK RED (From 6107) OFF AUTO ON BLACK RED OFF AUTO ON (From 6107) SL-6107 SL-6107 RED (In Wall) BLACK *COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different location, depending on the brand of your switch. RED is used to represent the second wire between two standard three-way switches. This may not be the color used in all installation. If you are not sure about your wiring, call an electrician for installation help. There is also a RED wire on the SL-6107 switch. Check the instructions above closely and do not confuse the two. -- 595-4514-15