ZyXEL NBG-417N User Guide - Page 50
Push Button Configuration PBC, PIN Configuration, Start, Push Button, Network, Wireless Client - driver
View all ZyXEL NBG-417N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 5 Tutorials • PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the NBG-417N's interface. See Section 5.2.1.2 on page 51. This is the more secure method, since one device can authenticate the other. 5.2.1.1 Push Button Configuration (PBC) 1 Make sure that your NBG-417N is turned on and that it is within range of your computer. 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into NBG-417N's Web Configurator and press the Push Button button in the Network > Wireless Client > WPS Station screen. Note: Your NBG-417N has a WPS button located on its panel, as well as a WPS button in its configuration utility. Both buttons have exactly the same function; you can use one or the other. Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The NBG-417N sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the NBG-417N securely. 50 NBG-417N User's Guide