ZyXEL NWD3105 User Guide - Page 24

WPA/WPA2, WPA/WPA2 Passphrase, Pre-Shared Key Static WEP, Con

Get ZyXEL NWD3105 PDF manuals and user guides View all ZyXEL NWD3105 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 24 highlights

 WPA/WPA2: Wi-Fi Protected Access  WPA/WPA2 Passphrase: Wi-Fi Protected Access Passphrase  802.1x: Enables 802.1x security.  Pre-Shared Key (Static WEP): Enables the use of shared keys that are defined on both the access point and the station. To define shared encryption keys, choose the Shared Key radio button and click Configure to fill in the Define Shared Keys window (shown in Figure 3-5). X  None: No security (not recommended).  Note: If the access point which the Adapter is associated has WEP set and the client has WEP enabled, make sure that Allow Association to Mixed Cells is checked on the HSecurity tabH to allow association. To complete WEP encryption configuration, you must select the 802.11 Authentication Mode as appropriate on the Advanced tab of this Profile Management dialog. To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode: Figure 3-5  Note: Select different Security Options, the configurations are different; you can select the appropriate security option and configure the exact key as your need. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
18
WPA/WPA2:
Wi-Fi Protected Access
WPA/WPA2 Passphrase:
Wi-Fi Protected Access Passphrase
802.1x:
Enables 802.1x security.
Pre-Shared Key (Static WEP):
Enables the use of shared keys that are defined on both the
access point and the station. To define shared encryption keys, choose the Shared Key
radio button and click
Configure
to fill in the Define Shared Keys window (shown in Figure
3-5
X
).
None:
No security (not recommended).
Note:
If the access point which the Adapter is associated has WEP set and the client has WEP
enabled, make sure that
Allow Association to Mixed Cells
is checked on the
H
Security tab
H
to
allow association. To complete WEP encryption configuration, you must select the 802.11
Authentication Mode as appropriate on the
Advanced
tab of this
Profile Management
dialog.
To configure the Encryption Keys under the Pre-Shared keys (Static WEP) Security mode:
Figure 3-5
Note:
Select different
Security Options
, the configurations are different; you can select the appropriate
security option and configure the exact key as your need.