ZyXEL NWD3105 User Guide - Page 30

Move Up, Move Down, Auto Select Profiles, Profile Management

Page 30 highlights

Figure 3-11 3. Highlight the profiles to add to auto profile selection, and click Add. The profile will appear in the Auto Selected Profiles box. 4. Highlight a profile in the Auto Selected Profiles box. 5. Click Move Up or Move Down as appropriate.  Note: The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the lowest priority. 6. Click OK. 7. Check the Auto Select Profiles checkbox on the Profile Management tab (shown in Figure 3-2). X  Note: When auto profile selection is enabled by checking Auto Select Profiles on the Profile Management tab, the client adapter will scan for an available network. The profile with the highest priority and the same SSID as one of the found networks will be used to connect to the network. If the connection fails, the client adapter will try the next highest priority profile that matches the SSID until an available network is found. 24

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47

24
Figure 3-11
3.
Highlight the profiles to add to auto profile selection, and click
Add
. The profile will appear in the
Auto Selected Profiles box.
4.
Highlight a profile in the Auto Selected Profiles box.
5.
Click
Move Up
or
Move Down
as appropriate.
Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has
the lowest priority.
6.
Click
OK
.
7.
Check the
Auto Select Profiles
checkbox on the
Profile Management
tab (shown in
X
Figure 3-2).
Note:
When auto profile selection is enabled by checking
Auto Select Profiles
on the
Profile
Management
tab, the client adapter will scan for an available network. The profile with the highest
priority and the same SSID as one of the found networks will be used to connect to the network. If
the connection fails, the client adapter will try the next highest priority profile that matches the SSID
until an available network is found.