ZyXEL P-128MH User Guide - Page 43

Prestige 128IMH ISDN Modem/ Router/Hub 2.5 Navigating the SMT Interface The SMT (System Management Terminal) is the interface that you use to configure your Prestige. Several operations that you should be familiar with before you attempt to modify the configuration are listed in the table below. Operation Table 2-2 Main Menu Commands Press/ Description Move forward to another menu [Enter] To move forward to a sub-menu, type in the number of the desired sub-menu and press [Enter]. Move backward to [Esc] a previous menu Press the [Esc] key to move back to the previous menu. Move the cursor [Enter] or [Up]/[Down] arrow keys Within a menu, press [Enter] to move to the next field. You can also use the [Up]/[Down] arrow keys to move to the previous and the next field, respectively. Enter information Fill in, or Press the [Space bar] to toggle You need to fill in two types of fields. The first requires you to type in the appropriate information. The second allows you to cycle through the available choices by pressing the [Space] bar. Required fields All fields with the symbol must be filled in order be able to save the new configuration. N/A fields Some of the fields in the SMT will show a . This symbol refers to an option that is Not Applicable. Save your configuration [Enter] Save your configuration by pressing [Enter] at the message [Press ENTER to confirm or ESC to cancel]. Saving the data on the screen will take you, in most cases to the previous menu. Exit the SMT Type 99, then Type 99 at the Main Menu prompt and press [Enter] to exit the SMT interface. press [Enter]. Hardware Installation and Setup 2-7