ZyXEL P-314 User Guide - Page 150
To get to the System Status:, Menu 24.1 - System Maintenance - Status
View all ZyXEL P-314 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Prestige 314 PLUS Broadband Sharing Gateway with 4-Port Switch 11.1.1 To get to the System Status: • Enter 24 to display Menu 24 - System Maintenance. • In this menu, enter number 1 to open System Maintenance - Status. • There are three commands in Menu 24.1 - System Maintenance - Status. Entering 1 drops the WAN (PPTP/PPPoE) connection, 9 resets the counters and [ESC] takes you back to the previous screen. The table below describes the fields present in Menu 24.1 - System Maintenance - Status. It should be noted that these fields are READ-ONLY and are meant to be used for diagnostic purposes. Port Status WAN 100M/Full LAN 100M/Full Menu 24.1 -- System Maintenance - Status 1:39:06 Thu. Jan. 1. 1970 TxPkts RxPkts Cols Tx B/s Rx B/s Up Time 1 0 0 0 0 0:00:00 0 0 0 0 0 0:00:00 Port: WAN LAN Ethernet Address 00:a0:c5:21:8c:a3 00:a0:c5:21:8c:a2 IP Address 0.0.0.0 192.168.1.1 IP Mask 0.0.0.0 255.255.255.0 DHCP Client Server System up Time: 1:08:22 Name: Routing: IP ZyNOS F/W Version: V3.60(CX.0)b2 | 07/02/2002 Press Command: COMMANDS: 1-Drop WAN 9-Reset Counters ESC-Exit Figure 11-2 Menu 24.1 - System Maintenance - Status The following table describes the fields present in Menu 24.1 - System Maintenance - Status. Table 11-1 System Maintenance - Status Menu Fields FIELD DESCRIPTION Port The WAN or LAN port. Status Shows the port speed and duplex setting if you're using Ethernet Encapsulation and Down (line is down), idle (line (ppp) idle), dial (starting to trigger a call) and drop (dropping a call) if you're using PPPoE Encapsulation. 11-2 System Information & Diagnosis