ZyXEL P-335U Quick Start Guide - Page 4

Hardware Connections, The LEDs - power

Page 4 highlights

1 Hardware Connections ENGLISH Do the following hardware connections for initial setup. 1 WAN Connection Connect your modem to the "WAN" port using the cable that came with your modem. 2 LAN Connection Connect your computer to a "LAN" port using the included Ethernet cable. 3 USB Connection Use a USB cable to connect a USB printer to this port. The P-335 Plus automatically detects the model of the USB printer. 4 POWER Connection Use the included power adaptor to connect the POWER socket to an appropriate power source. The LEDs Look at the top panel LEDs. When you connect the power, the PWR LED blinks and stays on once the device is ready. The LAN and WAN LEDs turn on if the corresponding connections are properly made. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95

ENGLISH
4
1 Hardware Connections
Do the following hardware connections for initial setup.
WAN Connection
Connect your modem to the “WAN” port using the cable that came with your modem.
LAN Connection
Connect your computer to a "LAN" port using the included Ethernet cable.
USB Connection
Use a USB cable to connect a USB printer to this port. The P-335 Plus automatically detects the
model of the USB printer.
POWER Connection
Use the included power adaptor to connect the
POWER
socket to an appropriate power source.
The LEDs
Look at the top panel LEDs. When you
connect the power, the
PWR
LED blinks and
stays on once the device is ready.
The
LAN
and
WAN
LEDs turn on if the
corresponding connections are properly made.
1
2
3
4