ZyXEL P-660HNU-F1 User Guide - Page 256
Firmware Specifications, Table 87, COLOR, STATUS, DESCRIPTION
View all ZyXEL P-660HNU-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 256 highlights
Chapter 27 Product Specifications Table 86 LED Descriptions LED NAME COLOR USB Green Off STATUS On Blinking DESCRIPTION The ZyXEL Device recognizes a USB connection but there is no traffic. The ZyXEL Device is sending/receiving data to/from the USB device connected to it. The ZyXEL Device does not detect a USB connection. Table 87 Hardware Specifications Power Specification 12V 1.0A DC Built-in Switch Four auto-negotiating, auto MDI/MDI-X 10/100 Mbps RJ-45 Ethernet ports RESET Button Restores factory defaults WLAN/WPS Button 1 second: Turn on or off WLAN Operation Temperature Storage Temperature Operation Humidity Storage Humidity 5 seconds: Start WPS 0º C ~ 40º C -25º ~ 65º C 20% ~ 90% RH 20% ~ 90% RH Firmware Specifications Table 88 Firmware Specifications Default IP Address 192.168.1.1 Default Subnet Mask 255.255.255.0 (24 bits) Default User Name admin Default Password 1234 DHCP Server IP Pool Starting Address: 192.168.1.33 Static DHCP Addresses Static Routes Device Management Wireless Functionality (wireless devices only) Firmware Upgrade Size: 32 10 16 Use the web configurator to easily configure the rich range of features on the ZyXEL Device. Allow the IEEE 802.11n, IEEE 802.11b and/or IEEE 802.11g wireless clients to connect to the ZyXEL Device wirelessly. Enable wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your wireless network. Download new firmware (when available) from the ZyXEL web site and use the web configurator, an HTTP/FTP/SCP/SFTP tool to put it on the ZyXEL Device. Configuration Backup & Restoration Note: Only upload firmware for your specific model! Make a copy of the ZyXEL Device's configuration. You can put it back on the ZyXEL Device later if you decide to revert back to an earlier configuration. 256 ADSL Series User's Guide