ZyXEL P-660HW-D1 v2 Quick Start Guide - Page 11
Viewing Your Product's Certifications, Internet/Wireless Setup, Bridge, Network, Internet Connection - open nat
View all ZyXEL P-660HW-D1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
P-660HW-Dx v2 Quick Start Guide • Click the wizard icon ( access the Internet. ). Run the Internet/Wireless Setup wizard again. Check whether you can If you still cannot access the Internet, take the following steps: • If you are using Bridge mode (check Mode in the Network > WAN > Internet Connection screen) click NAT > General and ensure Active Network Address Translation (NAT) is not selected. Click LAN > DHCP Setup and ensure that DHCP is set to None. Your ISP gives your computer an IP address directly. If you want to access the P-660HW-Dx v2 again, you need to use a static IP address in the same subnet as your P-660HW-Dx v2 (the P-660HW-Dx v2's default IP address is http://192.168.1.1). • Click the wizard icon ( access the Internet. ). Run the Internet/Wireless Setup wizard again. Check whether you can If you still cannot access the Internet, contact your Internet Service Provider. 3 If you cannot access the Internet using the wireless network, follow these steps. A) On a computer in the wireless network, open your browser, and go to http://192.168.1.1. If you see the login screen in section 3, follow suggestions A - F above. If you do not, go to the next step. B) On a computer connected to the P-660HW-Dx v2, make sure your P-660HW-Dx v2 and the computers on your wireless network are using the same wireless and wireless security settings. See the chapter on Wireless LAN in the User's Guide for more information. Viewing Your Product's Certifications 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page. 11