ZyXEL P-660W-T1 v2 Quick Start Guide - Page 11
using the same ESSID and security key on both the P-660W-Tx v2 - productions
View all ZyXEL P-660W-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
P-660W-Tx v2 Quick Start Guide 2 Select the ESSID name you gave the P660W-Tx v2 and click Connect. (The ESSID used here is an example.) 3 If you have set up wireless security, you are prompted to enter a password. Enter the PreShared Key you set up in the previous section and click Connect. 4 If you connected successfully, a message similar to the following displays. V If you cannot connect wirelessly to the P-660W-Tx v2, check that you are using the same ESSID and security key on both the P-660W-Tx v2 and your wireless client. 5 Congratulations! That completes the setup procedure for your P-660W-Tx v2. Open a web browser, such as Internet Explorer, to visit your favorite website. Procedure to View a Product's Certification(s) 1 Go to www.zyxel.com. 2 Select your product from the drop-down list box on the ZyXEL home page to go to that product's page. 3 Select the certification you wish to view from this page. 10