ZyXEL WAP5605 User Guide - Page 22
What You Can Do, 3.3 What You Need to Know, Status Screen
View all ZyXEL WAP5605 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 3 Easy Mode Click Status to open the following screen. Figure 9 Easy Mode: Status Screen Navigation Panel Go to Network Map Screen Status Screen Control Panel 3.2 What You Can Do You can do the following in this mode: • Use this Navigation Panel (Section 3.4 on page 23) to opt out of the Easy mode. • Use the Network Map screen (Section 3.5 on page 23) to check if your WAP5605 can ping the gateway and whether it is connected to the Internet. • Use the Control Panel (Section 3.6 on page 24) to configure wireless security. • Use the Status Screen screen (Section 3.7 on page 28) to view read-only information about the WAP5605, including the LAN IP, MAC Address of the WAP5605 and the firmware version. 3.3 What You Need to Know Wireless Security in the control panel is not configurable when the WAP5605 is in client mode. 22 WAP5605 User's Guide