ZyXEL ZyWALL USG 20 User Guide - Page 241
Cellular Add/Edit Screen
View all ZyXEL ZyWALL USG 20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 241 highlights
Figure 165 Configuration > Network > Interface > Cellular Chapter 11 Interfaces The following table describes the labels in this screen. Table 56 Configuration > Network > Interface > Cellular LABEL DESCRIPTION Add Edit Remove Activate Inactivate Connect Disconnect Object References Click this to create a new cellular interface. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. To connect an interface, select it and click Connect. You might use this in testing the interface or to manually establish the connection. To disconnect an interface, select it and click Disconnect. You might use this in testing the interface. Select an entry and click Object References to open a screen that shows which settings use the entry. See Section 11.3.2 on page 232 for an example. # This field is a sequential value, and it is not associated with any interface. Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is inactive. Name Extension Slot Connected Device ISP Settings Apply Reset The connect icon is lit when the interface is connected and dimmed when it is disconnected. This field displays the name of the interface. This field displays where the entry's cellular card is located. This field displays the name of the cellular card. This field displays the profile of ISP settings that this cellular interface is set to use. Click Apply to save your changes back to the ZyWALL. Click Reset to return the screen to its last-saved settings. 11.5.1 Cellular Add/Edit Screen To change your 3G settings, click Configuration > Network > Interface > Cellular > Add (or Edit). In the pop-up window that displays, select the slot that you want to configure. The following screen displays. ZyWALL USG 20/20W User's Guide 241