ZyXEL ZyWALL USG 20 User Guide - Page 339

Chapter 17 NAT Table 94 Configuration > Network > NAT (continued) LABEL DESCRIPTION Remove Activate Inactivate To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. # This field is a sequential value, and it is not associated with a specific entry. Status This icon is lit when the entry is active and dimmed when the entry is inactive. Name Mapping Type This field displays the name of the entry. This field displays what kind of NAT this entry performs: Virtual Server, 1:1 NAT, or Many 1:1 NAT. Interface This field displays the interface on which packets for the NAT entry are received. Original IP This field displays the original destination IP address (or address object) of traffic that matches this NAT entry. It displays any if there is no restriction on the original destination IP address. Mapped IP This field displays the new destination IP address for the packet. Protocol This field displays the service used by the packets for this NAT entry. It displays any if there is no restriction on the services. Original Port This field displays the original destination port(s) of packets for the NAT entry. This field is blank if there is no restriction on the original destination port. Mapped Port This field displays the new destination port(s) for the packet. This field is blank if there is no restriction on the original destination port. Apply Click this button to save your changes to the ZyWALL. Reset Click this button to return the screen to its last-saved settings. ZyWALL USG 20/20W User's Guide 339