ZyXEL ZyWALL USG 20 User Guide - Page 349

Chapter 18 HTTP Redirect Finding Out More See Section 6.5.10 on page 99 for related information on these screens. 18.2 The HTTP Redirect Screen To configure redirection of a HTTP request to a proxy server, click Configuration > Network > HTTP Redirect. This screen displays the summary of the HTTP redirect rules. Note: You can configure up to one HTTP redirect rule for each (incoming) interface. Figure 209 Configuration > Network > HTTP Redirect The following table describes the labels in this screen. Table 96 Configuration > Network > HTTP Redirect LABEL DESCRIPTION Add Edit Remove Activate Inactivate Click this to create a new entry. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. # This field is a sequential value, and it is not associated with a specific entry. Status This icon is lit when the entry is active and dimmed when the entry is inactive. Name This is the descriptive name of a rule. Interface This is the interface on which the request must be received. Proxy Server This is the IP address of the proxy server. Port Apply Reset This is the service port number used by the proxy server. Click Apply to save your changes back to the ZyWALL. Click Reset to return the screen to its last-saved settings. ZyWALL USG 20/20W User's Guide 349