iPod IWIP3G User Guide - Page 112
Bit 6, Bit 7, Bit 8, Bit 9, Bit 10, Bit 11, Bit 12, Bit 13, Bit 14, Bit 15, Bit 0
UPC - 649241862819
View all iPod IWIP3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Bit 6 Not used. Must be set to 0. Bit 7 Displays the PAIR event after successful pairing. Bit 8 Enables SCO links. This bit must be 1 if you use audio profiles. Bit 9 Must be set to 0. Bit 10 Must be set to 0. Bit 11 Enables interactive pairing mode. Where pin code is prompted rather then pin code set with "SET BT AUTH" used. Bit 12 If this bit is set iWRAP randomly replaces one of the existing pairings, when 17th pairing occurs (max number of pairings is 16). Bit 13 If this bit is set CLOCK event will be displayed on CONNET and RING events. Bit 14 If this bit is set UART will be optimized for low latency instead of throughput. Bit 15 If this bit is set low inquiry priority is used. This feature reduces inquiry priority and number of inquiry responses but improves simultaneous data transfer performance. optional_configuration Bit 0 If this bit is set. All changing iWRAP configuration with SET commands will be disabled. The only way to enable SET commands are by deleting PS-key: "user configuration data 30" 112