iPod IWIP3G User Guide - Page 79
Setpio {mask} {bits}, Getpio, Error, Test Txstart 2441 0xff3f 0, Test Pcmtone 1 5 0
UPC - 649241862819
View all iPod IWIP3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Plays a constant tone on the PCM port. freq range: 0 - 5 ampl range : 0-8 dc: 0 - 60096 (set to 0) SETPIO {mask} {bits} Sets PIO high or low according to given parameters. NOTE: This command sets the PIO regardless of other usage! mask: Bit mask specifying the PIOs that are to be set bits: the bit values If you use hexadecimals, put 0x in front of the value, otherwise they are interpreted as decimals. GETPIO Gets the status of all the PIO lines. Description: Response: OK for successful execution ERROR for unsuccessful execution 5.36.2 Examples TEST TXSTART 2441 0xFF3F 0 OK Example on how to set the module to transmit continuous carrier signal at 2441MHz and at full output power. TEST PCMTONE 1 5 0 OK Example on how to set the modules PCM output a constant signal for PCM testing. Note: Always consult Bluegiga Technologies about the right parameters for RF testing. The parameters are unique for each module: WT11, WT12 and WT32. 79