iPod IWIP3G User Guide - Page 97
Set Bt Role
UPC - 649241862819
View all iPod IWIP3G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
6.9 SET BT ROLE This command configures or displays the local device's role configuration. With the "SET BT ROLE" command, iWRAP's master-slave behavior can be configured. This command can also be used to set the supervision timeout and link policy. 6.9.1 Syntax Synopsis: SET BT ROLE {ms_policy} {link_policy} {supervision_timeout} Description: ms_policy link_policy This parameter defines how the master-slave policy works. 0 This value allows master-slave switch when calling, but iWRAP does not request it when answering (default value). 1 This value allows master-slave switch when calling, and iWRAP requests it when answering. 2 If this value is set, master-slave switch is not allowed when calling, but it is requested for when answering. This bitmask controls the link policy modes. It is represented in a hexadecimal format. Bit 1 If this bit is set, Role switch is enabled Bit 2 If this bit is set, Hold mode is enabled Bit 3 If this bit is set, Sniff mode is enabled Bit 4 If this bit is set, Park state is enabled F This value enables all of the above modes (the default value) 97