1998 Buick Skylark Owner's Manual - Page 94

li.wn and Lane Change Signals The turn signal has two upward (for right) and two downward (for left) positions. These positions allow you to signal a turn or a lane change. signal a turn, check the (see "Fuses and Circuit fuse Breakers" in the Index) and burned-out bulbs. for To signal a turn, move the lever all the wayor up down. When the turn finished, the lever will is return automatically. An arrow on the instrument panel willflash in the direction of the turn or lane change. Turn Signal On Chime A chime will sound if your turn signal is left on after having gone3/4 of a mile, to remind you to turn your signal off. Headlamp High/Low Beam To change the headlamps from low beam to high beam or high beam to low beam, pull theturn signal lever all the way toward you. Then releaseit. When the high beams are on, this light on the instrument on. panel also will be On vehicles equipped with Daytime Running Lamps if (DRL), thelight on the instrument panel may flash the DRL systemis experiencing a problem or a headlamp if is malfunctioning. To signal a lane change, raise or lowerthe lever just until the arrow starts to flash. Hold it there until you your lane change.The lever will return by complete itself when you release it. As you signal a turn a lane change, the arrows or if flash at twicethe normal rate, a signal bulb may be burned out. If a bulbis burned out, haveit replaced to help avoid an all accident. If the arrows don't go on at when you 2-33